Sensor Ranges; Filter Options - Advanced Navigation Spatial Reference Manual

11.8.2

Sensor Ranges

The sensor ranges dialogue is used to set the dynamic range of the sensors. If you are
experiencing over-range events during operation this dialogue should be used to
increase the range of the offending sensor. The lowest ranges give the best
performance so it is preferable not to use the highest range by default.
11.8.3

Filter Options

For most applications the default filter options should be used and only the vehicle
profile set. If in doubt please contact support@advancednavigation.com.au.
Illustration 40: Screenshot of Spatial Manager
sensor ranges dialogue
Illustration 41: Screenshot of Spatial
Manager filter options dialogue
Spatial Reference Manual
Page 79 of 158
Version 4.4
04/06/2019