Section 11: Bluetooth Connection - Emerson Bettis RTS FQ Series Operating Manual

Section 10: Infrared Connection
February 2019
Section 11:
In addition to the infrared interface, it is also possible to configure the Control System using
a Bluetooth interface.
Software required for Android equipment is available as an option. In addition to
communication with the actuator, the Android software also enables management of
multiple actuators, allowing easy transfer of parameter sets to various actuators. This
approach can significantly simplify commissioning.
When the Bluetooth interface is enabled, this is indicated by LED L5 (see Figure 65).
The Bluetooth interface can be enabled in menu item P20.6.
65
Bluetooth Connection
User Instructions
MAN-02-04-60-0351-EN Rev. 3
Infrared Connection