Parameter Group: Miscellaneous - Emerson Bettis RTS FQ Series Operating Manual

Section 8: Parameter Menu
February 2019
8.18

Parameter Group: Miscellaneous

Table 28.
P20.1
P20.2
P20.3
P20.4
P20.5
P20.6
P20.7
P20.11
59
Miscellaneous Parameter Group
Sub Menu
Menu Item
Item
Miscellaneous Language
Miscellaneous Smartcode
Restore
Miscellaneous
Parameters
Backup
Miscellaneous
Parameters
Miscellaneous Info line
Miscellaneous Infrared
Miscellaneous Menu style
Daylight
Miscellaneous
saving time
Poss.
Notes / Comments
Setting
0: German
1: English
2: Russian
3: Czech
4: Spanish
5: French
6: Italian
Defines the menu language
7: Danish
8: Hungarian
9: Turkish
10: Greek
11: Polish
12: Serbian
13: Croatian
Enables additional features by entering a Smartcode.
Customer By saving this setting, all parameters except the
conf. - end positions are reset to the customer parameters.
Customer By saving this setting, all parameters are reset to
conf. + the customer parameters.
Backup By saving this setting, all parameters except the
parameters. - end positions are reset to the factory settings.
Backup By saving this setting, all parameters are reset to
parameters. + the factory settings.
Customer By saving this setting, the currently set parameters
conf. are adopted as customer parameters.
The fourth line of the display shows various
{0} - 31
diagnostic values.
0: Off The infrared connection is disabled
The infrared connection is activated for about
1: Infrarot
3 minutes
The Bluetooth connection is active for about 3
2: Bluetooth
minutes unless communication is detected.
3: Infrarot+ The infrared connection is activated.
4: Bluetooth+ The Bluetooth connection is activated.
0 -2 Different menu styles.
0: Off Normal time is activated.
1: On Daylight saving time is activated.
The actuator switches automatically between
2: Auto
Daylight saving time and Normal time.
User Instructions
MAN-02-04-60-0351-EN Rev. 3
Parameter Menu