Operation - Emerson Bettis RTS FQ Series Operating Manual

Section 7: Control Unit
February 2019
L5
7.3

Operation

The actuator is operated via the switches located on the controller (selection and control
switch). All actuator settings can be entered with these switches. Furthermore, configuration
is also possible via the IR interface or the Bluetooth Interface (see Section 11). Flip the switch
up or down to regulate the parameter menu scrolling speed.
Figure 36
Figure 37
LED L1 and L2 can be changed by parameter P1.7 - see
29
Bluetooth Bluetooth data
Blue
enabled transmission
Infrared data
Red Infrared ON
transmission
Neutral Position
Slight Switch Flip (it will move to the next parameter)
User Instructions
MAN-02-04-60-0351-EN Rev. 3
Bluetooth ON, no data
transmission
Infrared ON
Section 18.1.
Bluetooth/
Infrared OFF
Control Unit