Emerson Bettis RTS FQ Series Operating Manual page 23

User Instructions
MAN-02-04-60-0351-EN Rev. 3
CAUTION: MAX. TORQUE MUST BE PARAMETERISED
Please note that during motor operation, only torque monitoring remains active as travel
adjustment will happen subsequently. Therefore, please check beforehand whether the
maximum torque has been already parameterised.
Step 6 - Absolute and relative values on the display will change continuously along with
position changes.
Figure 17
Figure 18
Commissioning
Selector Switch Flipped Down
Display (4)
Section 6: Commissioning
Febraury 2019
18