Section 10: Infrared Connection - Emerson Bettis RTS FQ Series Operating Manual

User Instructions
MAN-02-04-60-0351-EN Rev. 3
Section 10:
For easier communication and better visualization of the menu options, the unit provides
an infrared port for connection to a PC.
The required hardware (connection cable to the PC's RS-232 or USB connectors) and the
corresponding software are available as options.
During operation, it must be ensured that the IR interface surface is protected from strong
disturbances -which may other- wise compromise the communication.
Before mounting the infrared adapter, clean the surface of the infrared interface with a
damp cloth.
When the infrared interface is enabled, it is indicated by Light-emitting Diode L5
(see Figure 65).The infrared interface can be enabled in the menu item P20.6.
Figure 65
Display Overview:
1.
Status Area
Infrared Connection
LED IR Indicator
L5
Infrared connection
Section 9: Status Area
Febraury 2019
1
64