User Instructions
MAN-02-04-60-0351-EN Rev. 3
Section 7: Control Unit
The controller is intended to monitor and control the actuator and provides the interface
between the operator, the control system and the actuator.
7.1
Operating Unit
Operation relies on two switches: the control switch and a padlock-protected selector
switch. Information visualization is provided by 4 integrated indicator lights as well as the
graphic display. For better visibility, switch symbols (
Figure 32
Parts Overview:
1.
2.
3.
4.
The control switch has dual function.
The controller cover may be wiped clean with a damp cloth. The mounting position of the
control unit can be turned in 90
Commissioning
Selctor/Control Switch Operating Unit
4
1
Selector Switch
Control Switch
Graphic Display
LED Display
steps (see Section 5.2).
o
Section 6: Commissioning
Febraury 2019
,
,
,
) are on the cover.
3
2
26