User Instructions
MAN-02-04-60-0351-EN Rev. 3
Section 9: Status Area
The status area presents current process and diagnostic data. There data is read-only.
To access the status area, move the control switch in the direction where the selector
switch should be in the neutral position or in the remote position.
The status area is divided into 2 sub-areas:
•
•
9.1
Status
9.1.1
Figure 58
Display Overview:
1.
2.
9.1.2
Figure 59
Parameter Menu
Status
History
Status – Binary Outputs
Display of binary outputs: The display shows output control as opposed to output
status, i.e. the supply of the binary outputs is ignored. A switched output is
represented by 1.
Binary Output Display
Output Number
Signal (0 = Low; 1 = High)
Status – Binary Inputs
Display of binary inputs: A set input is represented by 1.
Binary Input Display
Section 8: Parameter Menu
Febraury 2019
60