Emerson Bettis RTS FQ Series Operating Manual page 37

User Instructions
MAN-02-04-60-0351-EN Rev. 3
Use the control switch towards to the characters to change the parameter
(see Figure 33 to Figure 36). After reaching the desired parameter value, confirm the value
with the selector switch again, flip it slightly towards
7.3.3
By way of example, we will change parameter P20.6 (wireless) from 0 (wireless off) to 2
(Bluetooth communication on). Thus, the Bluetooth connection is activated for a short
time and then deactivated again automatically.
Step 1 - The operating and control switch must be in the neutral position.
Figure 42
Parts Overview:
1.
2.
Step 2 - Now, move the control switch down towards until the menu item P20.6
Miscellaneous Wireless is displayed.
Figure 43
Control Unit
Configuration Example
Selector/Control Switch (2)
1
Selector Switch (red)
Control Switch (black)
Control Switch Flipped Down
Section 7: Control Unit
or
, (see Figure 24 to Figure 28).
2
Febraury 2019
32