Emerson Bettis RTS FQ Series Operating Manual page 22

Section 6: Commissioning
February 2019
Figure 14
This changes the bottom line of the display from EDIT? to SAVE?.
Figure 15
Figure 16
Step 5 - Then, push down the selector switch until it snaps into place. In doing so, the
bottom right now on the display will show "TEACHIN" Х.
CAUTION: USE APPROPRIATE SWITCH
Once the display shows "TEACHIN", use the control switch (black switch) to start the
motorized operation of the actuator. In this mode, no travel-dependent switch off occurs in
the end position.
17
Selector Switch in Neutral Position (2)
Display (2)
Display (3)
User Instructions
MAN-02-04-60-0351-EN Rev. 3
Commissioning