Emerson Bettis RTS FQ Series Operating Manual page 49

User Instructions
MAN-02-04-60-0351-EN Rev. 3
Table 13.
P9.1
P9.2
P9.3
P9.4
P9.5
Parameter Menu
Binary Inputs Parameter Group (2)
Menu Sub Menu
Poss. Setting
Item Item
31: Intermediate
position1
32: Intermediate
position2
33: Intermediate
position3
34: Intermediate
position4
35: Emergency
position
36: Intermediate
position1 inv.
Binary
37: Intermediate
Input 1
Input
position2 inv.
38: Intermediate
position3 inv.
39: Intermediate
position4 inv.
40: Emergency
position inv.
41: Travel Open
42: Travel Close
43: Travel Open
inv.
44: Travel Close
inv.
45: Failsafe lock
46: Failsafe lock
inv.
Bin. Input Input 2 see Input 1
Bin. Input Input 3 see Input 1
Bin. Input Input 4 see Input 1
Bin. Input Input 5 see Input 1
Section 8: Parameter Menu
Notes / Comments
Approach intermediate position 1 (P8.1) in
REMOTE mode (fix position approach). There is no
repositioning upon reaching the intermediate
position within the hysteresis (see P8.6). Higher
priority than intermediate position 2, 3 and 4
As intermediate position 1, but with higher priority
than intermediate positions 3 and 4
As intermediate position 1, but with higher priority
than intermediate position 4
As intermediate position 1, but with lowest priority
Approach emergency position (P 8.5). As
intermediate position 1, but with higher priority than
intermediate positions 1, 2
As Intermediate position 1, but active low
As Intermediate position 2, but active low
As Intermediate position 3, but active low
As Intermediate position 4, but active low
As Emergency position, but active low
reserved for future use
reserved for future use
reserved for future use
reserved for future use
reserved for future use (only for Failsafe actuators)
reserved for future use (only for Failsafe actuators)
Febraury 2019
44