Chapter 1 Introduction; Using This Manual; Control Unit Versions And Software Releases; Product Recycling/Disposal - Emerson Rosemount 3490 Series Reference Manual

Reference Manual
00809-0100-4841
1 Introduction
1.1

Using this manual

This manual provides installation, configuration and maintenance information for the
Rosemount
Control unit overview
transmitter inputs, control functions, and front panel features.
Installation
Getting started
new HART
instructions for configuring the control unit using the front panel.
Service and troubleshooting
health check system, which includes tests, calibrations, live readings, and diagnostic data
for the control unit.
Specifications and reference data
Product certifications
certifications and approval drawings.
Menus and parameter
transmitters.
Additional features
using the advanced menu for accessing parameter screens quickly.
Support for HART
Series Transmitters and generic support using Universal and Common Practice
Commands.
1.2

Control unit versions and software releases

The following control unit versions are covered in this product manual:
• Rosemount 3491 Standard Control Unit
• Rosemount 3492 Differential Control Unit
• Rosemount 3493 Logging Control Unit
The software release covered in this product manual is issue 4.00.00 (and above).
1.3

Product recycling/disposal

Recycling of equipment and packaging should be taken into consideration and disposed of
in accordance with local and national legislation or regulations.
Emerson.com/Rosemount
™
3490 Series Control Unit ("control unit").
contains an overview of the wall- and panel-mounting versions,
contains mechanical and electrical installation instructions.
contains instructions for powering on the control units the first time with a
®
transmitter connected, followed by a quick tour of the menu system and
contains instructions for replacing the fuse and a guide to the
contains specification data and ordering information.
contains European directive information, hazardous locations
contains full menu maps for the control unit and generic HART
contains instructions for restoring the factory default settings and for
®
Transmitters contains an overview of fully supported Rosemount 3100
Introduction
January 2021
7