Santerno DCREG2 Series User Manual page 79

DCREG2
DCREG4
E. The keypad is removed.
F. Extract the wire by pressing on the connector tab.
E
G. Insert the keypad frame again. Fasten with the proper screw.
H. Connect an end of the keypad extension cord to the connector installed on the DCREG.
G
I. Insert the other end of the cord in the connector installed on the keypad rear part.
J. Remove the film from the stick-on label and apply it on the keypad front part.
I
F
H
J
15P0059B3
USER MANUAL
79/200