C154: Alarm A007 Trip Disabling; C155: Alarm A008 Trip Management; C156: Alarm A010 Trip Disabling; C157: Alarm A016/017 Trip Disabling - Santerno DCREG2 Series User Manual

DCREG2
DCREG4
7.3.42 C154: A
C154 A007 (Mains)
*
7.3.43 C155: A
C155 A008 (nFdbk)
***
7.3.44 C156: A
C156 A010 (ArmOV)
***
7.3.45 C157: A
C157 A016/7 ( VAC)
***
7.3.46 C158: A
C158 A027 (SLink)
***
A007 T
LARM RIP
P C154 - A007(Mains)
0 ... 1
R
0
D
It inhibits alarm A007 (Mains Failure).
F
0:Included. The alarm is enabled.
1:Excluded. The alarm is disabled.
A008 T
LARM RIP
P C155 - A008(nFdbk)
0 ... 2
R
0
D
This parameter manages alarm A008 (Speed Feedback Failure) trip.
F
0:Included. The alarm is enabled.
1:Excluded. The alarm is disabled.
2:Switch to Varm. The alarm is disabled, but a speed feedback loss will cause
the automatic switching of the speed feedback from TACHO or ENP/NR to
ARMATURE feedback. If this happens, also warning W002 (Speed Fdbk
switched to Varm) will trip. To reset it, disable the ENABLE digital input.
A010 T
LARM RIP
C156 – A010(ArmOV)
P
R 0 ... 1
D 0
F This parameter inhibits alarm A010 (Armature OverVoltage) trip.
0:Included. The alarm is enabled.
1:Excluded. The alarm is disabled.
A016/017 T
LARM
P C157 - A016/7( VAC)
0 ... 1
R
0
D
F It inhibits both alarm A016 (Mains OverVoltage) and A017 alarm (Mains
UnderVoltage).
0:Included. The two alarms are enabled.
1:Excluded. The two alarms are disabled.
A027 T
LARM RIP
P C158 - A027 (SLink)
R 0 ... 1
D 1
It inhibits alarm A027 (Serial Link Failure) trip.
F
0:Included. The alarm is enabled.
1:Excluded. The alarm is disabled.
D
ISABLING
M
ANAGEMENT
D
ISABLING
D
RIP ISABLING
D
ISABLING
15P0059B3
USER MANUAL
181/200