2.11 Backup And Restoration Of Stored Parameters - Santerno DCREG2 Series User Manual

15P0059B3
USER MANUAL

2.11 BACKUP AND RESTORATION OF STORED PARAMETERS

2.11.1 After starting the device and checking its correct settings, it is recommended that the user writes
down the parameters that have been changed (and stored) with respect to their default values. To do so,
use the special table specified on the last pages of the OPERATION MANUAL, in chapter USER'S
PARAMETERS CHANGED WITH RESPECT TO DEFAULT VALUES. If you set par. P000 to 2:Modified
Parms and if you scroll all other parameters using the arrow keys, the display will show only those
parameters having a current value different than the default value.
2.11.2 A backup of the stored parameters is recommended. If need be, set par. P002 to
2:WorkAreaBackup to enable the backup parameter restoration. To do so, set par. P002 to 3:Backup
Restore.
22/200
DCREG2
DCREG4