M016: Field Bus Reference; M017: Field Current Reference; M018: Field Current; M019: Analog Output 1 On Terminal 8 - Santerno DCREG2 Series User Manual

DCREG2
DCREG4
7.1.17 M016: F
M016 FBusRef
FBRef ***** %
7.1.18 M017: F
M017 FldCurrRef
RefFld **** %
7.1.19 M018: F
M018 FldCurrent
Ifld **** Amps
7.1.20 M019: A
M019 AnalogOut1
AnOut1 ***** V
7.1.21 M020: A
M020 AnalogOut2
AnOut2 ***** V
B R
IELD US EFERENCE
P M016 - FBRef
-100. ... 100. %
R
This parameter indicates, as a percentage of the max. value corresponding to
F
10V, the value of the reference applied through the field bus.
C
IELD URRENT
P M017 - RefFld
0.00 ... 100. %
R
It indicates, as a percentage of the max. reference corresponding to the max.
F
field current that may be generated by the drive, the current loop input
(corresponding to the voltage loop output) of the internal field regulator. The
standard values of the max. field current generated by the drive are equal to 5A
for DCREG.100max, 15A for DCREG.150min Size 1, and 35A for DCREG Size
2(A) and MODULAR.S.
For instance, for a DCREG.350, 100% of M017 will correspond to 15A.
C
IELD URRENT
P M018 - Ifld
R 0.00 ... 40.0 Amps
F This parameter indicates, in Amperes, the field current feedback value obtained
through the zero gauss current transformer.
O
NALOG UTPUT
M019 - AnOut1
P
R -10.0 ... +10.0 V
F This parameter indicates, in Volts, the value of the analog output available on
terminal 8.
The output at issue may be configured through parameter P150.
The value per cent displayed in this parameter considers the Gain, Bias and
Polarity operators set through parameters P152, P151 and P157 respectively.
O
NALOG UTPUT
M020 - AnOut2
P
-10.0 ... +10.0 V
R
This parameter indicates, in Volts, the value of the analog output available on
F
terminal 10.
The output at issue may be configured through parameter P153.
The value per cent displayed in this parameter considers the Gain, Bias and
Polarity operators set through parameters P155, P154 and P158 respectively.
R
EFERENCE
1 T
ON ERMINAL
2 T
ON ERMINAL
15P0059B3
USER MANUAL
8
10
127/200