Electrical Connection - Festo MS6-SV-E Operating Instructions Manual

MS6-SV-...-E-10V24
6

Electrical connection

Caution
Danger of injury from electric shock
• The electrical connection may only be created in a voltage-free status and only by
qualified personnel.
Caution
Use only power sources which guarantee reliable electrical disconnection of the operat-
ing voltage in accordance with IEC/DIN EN 60204-1. Observe also the general require-
ments for PELV power circuits in accordance with IEC/DIN EN 60204-1.
Note
Long signal lines reduce the resistance to interference.
• Make sure that the signal lines are not longer than 20 m.
• The signal lines must be separated from lines that emit interference, in accordance
with EN 60204-1.
60 Festo – MS6-SV-...-E-10V24 – 1310b English