Mechanical/Pneumatic Installation; Mechanical Installation - Festo MS6-SV-E Operating Instructions Manual

MS6-SV-...-E-10V24
5

Mechanical/pneumatic installation

5.1

Mechanical installation

Note
In order to ensure electromagnetic compatibility in accordance with the EMC directive,
observe the following:
• Observe wall distance of 32 mm (e.g. with the mounting bracket MS6-WPB).
• Do not install a cable between wall and MS6-SV-E.
Note
Loss of the safety function
If the minimum distance of 15 mm between the silencer and base is not maintained, loss
of the safety function can result.
• Observe distance of 15 mm below the silencer (
trouble free venting.
Information about mounting of the module connector, sub-base and mounting bracket
can be found in the operating instructions enclosed with the relevant accessories.
• Place the MS6-SV-E as close as possible to the
location of use.
• The mounting position is any desired.
Festo – MS6-SV-...-E-10V24 – 1310b English
Fig. 13). The free space ensures
Fig. 13 Installation
57