Port 3 (Thread Size G1 Or Npt1); Electrical Connection - Festo MS6N-SV-***-E-ASIS Series Operating Instructions Manual

MS6(N)-SV-...-E-ASIS
For larger screw-in depths, the sub-bases MS6-AG.../AQ... from Festo must be used.
• Make sure that the compressed air lines are connected correctly.
• Screw the connectors into the pneumatic ports using appropriate sealing material.
5.2.2

Port 3 (thread size G1 or NPT1)

Exhausting a system through the MS6(N)-SV-...-E-ASIS creates high noise levels. We therefore recom-
mend that you use a silencer.
Caution
Danger of injury due to residual pressure in the system
If a commercially-available silencer is used, the body of the silencer may become
clogged, which can result in reduced exhaust performance and back pressure.
• Use the safety silencer designed for the product
• Only use a commercially-available silencer if it will be maintained at regular intervals
by service staff and only in combination with a back pressure monitoring system.
• Screw the silencer into the pneumatic port 3.
Note
For MS6N-SV-...-E-ASIS an adapter (from thread size NPT1 to G1) must also be mounted
between silencer and product.
• Make sure that there is unrestricted exhausting. Neither the silencer nor port 3 may be blocked.
6

Electrical connection

Caution
Danger of injury from electric shock
• Create the electrical connection only in a voltage-free status and only by qualified
personnel.
Caution
Only use AS-interface power sources that guarantee reliable electrical disconnection of
the operating voltage in accordance with IEC/DIN EN 60204-1. Observe also the general
requirements for PELV power circuits as per IEC/DIN EN 60204-1.
Festo – MS6(N)-SV-...-E-ASIS – 1205NH English
12 Accessories.
43