Festo MS6-SV-E Operating Instructions Manual page 54

MS6-SV-...-E-10V24
Fig. 9 Static enable signals - signal distance
The diagrams for the switching characteristics can be found in the chapter 14 "Technical data"
( Fig. 22).
Switching statuses
Note
The time delay t2 between EN1 and EN2 must be automatically determined. The dura-
tion of the delay is not evaluated. The multi-pin plug socket NECA-MP5 does not allow
any cross-circuit detection through the MS6-SV-E.
54 Festo – MS6-SV-...-E-10V24 – 1310b English