Samsung DCS
Note:
•
You can first view message indications and return them in the order you
choose. See Viewing Message Indications under Display Features.
•
If the Hot Keypad feature has been turned off, you must first lift the handset or
press the
SPEAKER
•
If a message has been left at your keyset by a keyset in Auto Answer mode,
you must manually cancel the message after it has been returned.
Programmed Messages
When you plan to be away from your phone for any length of time,
you can leave a programmed station message on your phone's display
(e.g. In a Meeting). Display keysets calling you will also see this
message. The message may also contain instructions for callers to
follow. There are 20 possible messages (01–20). Messages 01–10 are
set up by default as follows:
01.
02.
03.
04.
05.
06.
07.
08.
09.
10.
Messages 11–20 are blank for new messages.
Note:
All programmed messages (01–20) can be changed by reprogramming the system.
Therefore, some or all of the messages shown above may be different on your sys-
tem. To find out what your messages are, follow the procedure below. If necessary,
ask your system administrator to set up specific messages you might require.
key before you begin dialling.
IN A MEETING
OUT ON A CALL
OUT TO LUNCH
LEAVE A MESSAGE
PAGE ME
OUT OF TOWN
IN TOMORROW
RETURN AFTERNOON
ON VACATION
GONE HOME
– 38 –
Keyset User Guide