Create Programmed Station Messages - Samsung DCS-816 System Administration And Special Features Manual

SAMSUNG
DCS-816
ACTION
1. Select 606
2. Press right soft key to advance cursor
3.
Press UP or DOWN key to select SYSTEM to program
system speed dials, or EXT (extension) to program per-
sonal speed dials
If you select EXT, go to step 5
If you select SYSTEM, press right soft key and go to step
4
4. Enter valid number of blocks to assign
OR press UP or DOWN key to select and press right soft
key
OR press HOLD to delete block(s)
System returns to step 3 to make another selection
(If finished go to step 6)
5. Enter desired EXT (extension) number via keypad (e.g.,
205) OR press UP or DOWN key to make selection and
press right soft key to advance cursor
6. Enter valid number of blocks (0–5)
OR press UP or DOWN key to make selection
OR press HOLD key to delete block(s)
7.
Press TRSF to store and exit programming
OR press SPEAKER to store and advance to next pro-
gram

3.12 CREATE PROGRAMMED STATION MESSAGES

Up to 20 messages can be programmed. Messages 1-10 are set up by default, but these
can be changed. You can also create 10 additional 16-character messages (11-20) that fit
your company's needs. After programming these messages, inform station users.
PROGRAM KEYS
UP & DOWN
KEYPAD
HOLD
Open customer programming and follow the instructions below.
Select the message number.
Used to enter characters.
Press to clear entry.
3 - 11
System Administration and Special Features Guide
DISPLAY
FREE LIST:60
SYSTEM:20
FREE LIST:60
SYSTEM:20
FREE LIST:60
SYSTEM:20
FREE LIST:60
EXT205:1
FREE LIST:60
EXT205:5
March 1999
[MMC 715]