Height Adjust - Arjohuntleigh KinAir MedSurg Pulse User Manual

Height Adjust

Use the Height Adjust feature to adjust the height and angle of the bed surface and
frame.
RAISE / LOWER HEAD OF BED
Use the HEAD UP / DOWN arrows to adjust the angle of the head-end surface of the
bed from a level position to a raised position of 0° to +54°.
•
Press HEAD UP arrow to raise head of bed.
•
Press HEAD DOWN arrow to lower head of bed.
•
Head Angle Gauge is located on lower Frame.
RAISE / LOWER HEIGHT OF BED
Use the BED UP / DOWN arrows to adjust height of frame surface from 22 in to 31 in.
•
Press BED UP arrow to raise patient surface.
•
Press BED DOWN arrow to lower patient surface.
RAISE / LOWER FOOT OF BED
Use the FOOT UP / DOWN arrows to adjust the Knee Gatch from 0° to 38°.
•
Press FOOT UP arrow to raise Knee Gatch.
•
Press FOOT DOWN arrow to lower Knee Gatch.
Patient left side shown above.
5-3
UP UP
HEAD BED
DOWN DOWN
HEIGHT ADJUST
UP
FEET
DOWN