•
Turn Heater On or Off and adjust its target temperature.
•
Raise and lower head, foot sections, or the entire patient support surface.
Heater Menu
Use the Heater Menu to view current status and adjust heater settings:
•
Press HEAT ON / OFF to activate Heater.
•
Press °F / °C button to change temperature from degrees Celsius to degrees
Fahrenheit or from degrees Fahrenheit to degrees Celsius.
•
Press TEMP UP or TEMP DOWN arrows to adjust target Heater setting.
Alarm Silence
Use the ALARM SILENCE button to silence the following alarm conditions:
NOTE: An ALARM SILENCE button is also located on the Auxiliary Control Panel.
•
SEAT DEFLATE - Alarm will sound when Seat Deflate has been activated for
longer than 12.50 minutes. If more time is required, pressing ALARM SILENCE
provides another 12.50 minutes of silence.
•
INSTAFLATE - Alarm will sound when InstaFlate is engaged. Pressing ALARM SILENCE provides 12.50 minutes of
silence.
•
CPR - Alarm will flash silent when CPR is engaged when unit is in use.
NOTE: Pressing ALARM SILENCE stops audible alarms; however, ALARM SILENCE LED will continue to flash until
alarm condition is cleared.
•
EXIT ALARM - An audible alarm will sound if a 10% or more decrease in patient weight is detected.
NOTE: On the Scale Control Panel, press EXIT ALARM button to turn Exit Alarm either ON or OFF.
5-2
HEATER
UP
TEMP
ON
°F
DOWN
HEAT
°C
OFF
ALARM
SILENCE