Arjohuntleigh KinAir MedSurg Pulse User Manual page 3

TM
This KinAir MedSurg Pulse
guide. For additional information, or for specific questions, please contact ArjoHuntleigh Customer Service.
In order for ArjoHuntleigh products to function properly, the following conditions must be met. Failure to comply with these
conditions will void any pertinent warranties.
•
It is strongly recommended that all assembly, operation, adjustment, modification, maintenance and / or repair must be
carried out only by qualified personnel authorized by ArjoHuntleigh.
•
The electrical installation of the room must comply with the appropriate electrical wiring standards.
•
The product must be used in accordance with this manual and all applicable labeling.
Upon meeting confidentiality and other requirements, ArjoHuntleigh will make available upon request circuit wiring
diagrams, component parts lists, descriptions, calibration instructions or other information which will assist the user's
appropriately qualified personnel to repair those parts of the equipment designated by the manufacturer as reliable.
Although this equipment conforms with the intent of the directive 89/336/EEC in relation to Electromagnetic Compatibility,
all electrical equipment may produce interference. If interference is suspected, move equipment away from sensitive devices
or contact the manufacturer.
This product may be a remanufactured product. This product has been configured from the manufacturer to meet specific
voltage requirements. Refer to the product information label to verify 120 VAC, 12 Amp configuration.
TM
User Manual is not a guarantee or warranty as to this product. It is intended only as a user's
NOTICE
i