Oil Seal Removal And Installation; Bearing Inspection - Suzuki RM-Z250 Owner's Service Manual

OIL SEAL REMOVAL AND INSTALLATION

• Remove the oil seals (1, 2, 3, 4) with the special tool.
The removed oil seal should be discard.
" 09913-50121: Oil seal remover
• Install each new oil seal with the special tool.
" 09913-70210: Bearing installer set
Oil seal 1, 4: $ 40 Attachment
Oil seal 2: $ 22 Attachment
Oil seal 3: $ 17 Attachment
• Apply grease to each oil seal lip.
% 99000-25010: SUZUKI SUPER GREASE "A"
NOTE:
Be sure to check the direction of the crankshaft bearing oil seal
4 before installing them.

BEARING INSPECTION

• Inspect the bearings for play, discoloration, wear and seizure.
• Move the inner race by finger and inspect for smooth move-
ment.
• If it does not move smoothly, replace the bearing with a new
one.
CAUTION
(or equivalent grease)
TRANSMISSION AND CRANKSHAFT 10-9
PRIMARY
DRIVE
GEAR
SIDE