Table of Contents
Advertisement
2.3 Image Stabilization Control
The imagePRESS 1110+ contains four separate skew adjustment rollers which
ensure that an image is placed in the same location on every sheet of paper.
Accurate front to back registration is actively adjusted during print runs, and
consistency is maintained at high speeds with non-stop operation. This works
effectively for thin paper as well. Skew adjustment and shift rollers feed thin paper
accurately without folding or crumpling.
2.4 Customer-Defined Image Quality Adjustments and Recommendations
Customer-defined image quality adjustments enable the customer to enhance the
productivity of the machine. There are several user modes, such as the Device
Management Settings and Paper Type Management Settings modes, which
provide adjustment functions, to help maintain the desired image quality for each
job. These settings also aim at reproducing optimal images under variable factors
(i.e., changes in the environment).
To achieve the best image quality the following factors are recommended:
• Tighter control of the temperature and humidity will result in tighter image quality
consistency in the device.
• The device must be properly maintained, which includes performing preventative
maintenance as scheduled.
• The customer should perform an Auto Gradation Adjustment once a day and
whenever a change in print quality is noticed. Use a high-quality, 17 to 28 lb bond
(64 to 105 g/m
Auto Gradation Adjustment.
2.5 Notes on the Hard Disk
Do not turn the machine OFF via the main power switch. Turning the machine OFF
via the power switch may negatively impact the performance and life of the drive.
Make sure to use the Control Panel Power Switch on the operating console to turn
OFF the machine properly. For instructions on shutting down the machine properly,
see the Introduction to the Machine e-Manual.
It is strongly recommended that the Administrator of the machine back up
important data, such as Inbox or Address Book contents, using the machine's
System Administrator mode periodically.
Version 3
2
), thin or plain, 11" x 17" or LTR sized paper when performing an
imagePRESS 1110+ Customer Expectations Document
Page 7
Advertisement
Table of Contents
