Bin Unit; Removing The Bin Unit; Removing The Bin Unit - Canon STAPLER SORTER-L1/MS-C1 Service Manual

CHAPTER 3 MECHANICAL SYSTEM
II. BIN UNIT
A. Removing the Bin Unit
1) Remove the front cover, right cover, and
rear cover.
2)*1 Disconnect the two connectors [1] of the
sorter controller PCB.
3)*1 Remove the three screws [3], and detach
the bin harness [2].
Caution:
When fitting the bin unit into the body,
take care not to twist the bin harness.
4) Remove the screw [5], and detach the bin
stopper [4]. Then, remove the bin stopper
at the rear in the same way.
3-2
COPYRIGHT © 1998 CANON INC. CANON STAPLER SOTRER-L1 MS-C1 REV.0 NOV. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]*1
[3]*1
Figure 3-201
*1 Stapler sorter only.
Figure 3-202
[2]*1
[4]
[5]