Main Units; Removing The Pickup Unit - Canon Paper Deck-AF1 Service Manual

4
Parts Replacement and Cleaning Procedure > Main Units > Removing the Pickup Unit

Main Units

Removing the Pickup Unit

MEMO:
The procedure for removing the pickup unit of the upper deck is described here. This procedure
can be used for the middle deck and lower deck.
1) Insert a relatively small screwdriver in the hole in the right side panel of the upper deck to release and
open the upper deck.
3) Open the clamp, and then remove two connectors.
4 Parts Replacement and Cleaning Procedure > Main Units > Removing the Pickup Unit
2) Remove a screw, and then remove the harness cover.
F-4-33 F-4-33
4) Remove the two screws securing the pickup unit. Open the upper deck fully.
F-4-35 F-4-35
x1
x2
21
F-4-34 F-4-34
F-4-36 F-4-36
21