Swing Unit - Canon Finisher-T1 Service Manual

Chapter 3
[6]
[4]
[5]
[1]
F-3-10
5) Turn the stapler over, disconnect two
connectors [1], remove two screws [2], and
remove the stapler from the stapler base.
[2]
[1]
F-3-11
3-6
[3]
[2]

3.2.2 Swing Unit

3.2.2.1 Removing the
Front Door
Refer to Procedure 3.1.5
3.2.2.2 Removing the
Rear Upper Cover
Refer to Procedure 3.1.1
3.2.2.3 Removing the
Escape Tray Cover
Refer to Procedure 3.1.6
3.2.2.4
Removing the
Front Inside Upper
Cover
Refer to Procedure 3.1.4
3.2.2.5 Removing the
Grate-shaped
Guide
Refer to Procedure 3.1.2
3.2.2.6 Removing the
Tray 1
Refer to Procedure 3.3.2
3.2.2.7 Removing the
Tray 2
Refer to Procedure 3.3.3
0009-4495
0009-4496
0009-4415
0009-4497
Upper
0009-3665
0009-3666
0009-3668