Stapler Swing Unit; Removing The Stapler Unit Swing Motor (M1); Removing The Stapler Swing Unit - Canon STAPLER SORTER-L1/MS-C1 Service Manual

V. STAPLER SWING UNIT
(Stapler sorter only)
A. Removing the Stapler Unit
Swing Motor (M1)
1) Remove the right cover.
2) Disconnect the connector [1], and remove
the two screws [2]; then, detach the stapler
swing unit swing motor [3].
B. Removing the Stapler Swing
Unit
1) Remove the front cover, right cover,
stapler unit, and stapler swing motor.
2) Disconnect the two connectors [1], and
remove the three screws [2]; then, detach
the stapler swing unit [3].
COPYRIGHT © 1998 CANON INC. CANON STAPLER SOTRER-L1 MS-C1 REV.0 NOV. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 MECHANICAL SYSTEM
[3]
Figure 3-501
[2]
Figure 3-502
[2]
[1]
[2]
[3]
[1]
3-11
[2]