Installing The Ap150; Safety Precautions; Fcc Safety Compliance Statement; General Safety Guidelines - Meru Networks ap150 Installation Manual

This chapter describes how to physically install the Meru AP150. It contains the following sections:

Safety Precautions

Unpacking the AP150
Installation Requirements
Installing the Access Point
Where to Go From Here
Checking LED Activity
Safety Precautions
Follow the guidelines in this section to ensure proper operation and safe use of the access point.

FCC Safety Compliance Statement

The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio
frequency (RF) electromagnetic energy emitted by FCC certified equipment. When used with
approved Meru access point antennas, Meru AP150 products meet the uncontrolled environmental
limits found in OET-65 and ANSI C95.1, 1991. Proper installation of this radio according to the
instructions found in this manual will result in user exposure that is substantially below the FCC
recommended limits.

General Safety Guidelines

Do not touch or move antenna(s) while the unit is transmitting or receiving.
Do not hold any component containing a radio so that the antenna is very close to or touching any
exposed parts of the body, especially the face or eyes, while transmitting.
The use of wireless devices in hazardous locations is limited to the constraints posed by the local
codes, the national codes, and the safety directors of such environments.

Installing the AP150

Safety Precautions
Chapter 3
Installing the AP150 23