Connecting The Power Source Cord; Installing The Accessory Ring Core (Only For The Eu Type Models); Installing The Accessory Ring Core Supplied With The Electrical Box - JUKI LZ-2290CS Instruction Manual

2-11-2. Connecting the power source cord

Voltage specifications at the time of delivery from the factory are indicated on the voltage indication seal.
Connect the cord in accordance with the specifications.
Power indication tag
(For example : In the case of 200V)
• Connecting single phase 220 to 240V
Table
Control box
Green/Yellow
Light blue
• Connecting 3-phase 200 to 240V
Table
Control box
Green/Yellow
Black
Red
• Connecting single phase 100 to 120V
Table
Control box
Green/Yellow
Black
Red

2-12. Installing the accessory ring core (Only for the EU type models)

2-12-1. Installing the accessory ring core supplied with the electrical box

Refer to accessory manual for "Installing the accessory ring core" supplied with the electrical box for how to
install the ring core.
Rating plate
Brown White
Green/Yellow
Power switch
Black
White
White
Green/Yellow
Black
Red
Power switch
White
White
Green/Yellow
Power switch
Black
Never use under the wrong voltage and phase.
White
Black
Green/Yellow — GND
White
Black
Red
Green/Yellow — GND
– 9 –
AC220 to 240V
AC200 to 240V
After screwing the cable to the
power switch, bind the cable
sheath portion with an acces-
sory clip band inside the power
switch.