Editing The Continuous Sewing Pattern - JUKI LZ-2290CS Instruction Manual

8-3-2. Editing the continuous sewing pattern

The number of steps of and the step-by-step conditions for the continuous sewing pattern are changed fol-
lowing the steps of procedure described below.
① Displaying the sewing screen (maintenance personnel mode) for the continuous sewing pattern
<Sewing screen (Maintenance personnel mode)>
② Editing the number of steps of and the step-by-step conditions for the continuous sewing pattern
❷
<Continuous sewing step edit screen>
❹
❹
<Sewing shape selection screen>
❶
❸
❺
❸
– 128 –
❶ on the sewing screen under
1) Press
the maintenance personnel mode.
The "Continuous sewing step edit screen" is
displayed.
2) Step changeover condition is displayed in ❷ .
Press ❷ to place the number of stitches in
the selected state.
The screen returns to the previous one or
advances to the next one with
3) When the selected step is pressed again, the
"Sewing shape selection screen" is displayed.
4) Select sewing shape ❹ .
The screen returns to the previous one or
advances to the next one with
❻ is pressed, the operation is
5) When
confirmed. Then, the screen returns to the
"Continuous sewing step edit screen".
❸ .
❺ .