Connecting The Power Source Cord; Installing The Accessory Ring Core (Only For The Eu Type Models); Installing The Accessory Ring Core Supplied With The Electrical Box - JUKI LH-4500C Series Instruction Manual

2-8-2. Connecting the power source cord

Voltage specifications at the time of delivery from the factory are indicated on the voltage indication
seal. Connect the cord in accordance with the specifications.
Power indication tag
(For example : In the case of 200V)
• Connecting single phase 220 to 240V
Table
Control box
Green/Yellow
Light blue
• Connecting 3-phase 200 to 240V
Table
Control box
Green/Yellow
Black
Red
• Connecting single phase 100 to 120V
White
Table
Control box
Green/Yellow
Black
Red

2-9. Installing the accessory ring core (Only for the EU type models)

2-9-1. Installing the accessory ring core supplied with the electrical box

Refer to accessory manual for "Installing the accessory ring core" supplied with the electrical box for
how to install the ring core.
Never use under the wrong voltage and phase.
Brown
White
Green/Yellow
Black
Power switch
White White
Green/Yellow
Black
Red
Power switch
White
Green/Yellow
Black
Power switch
Rating plate
White
Black
Plug
Green/Yellow — GND
White
Black
Red
Green/Yellow — GND
– 9 –
AC220 to 240V
AC200 to 240V
After screwing the cable to
the power switch, bind the
cable sheath portion with
an accessory clip band
inside the power switch.