③ Retrieval of the origin
❹
<Origin retrieval screen>
④ Setting the clock
<Mode screen>
<Clock setting screen>
❸
❻
❼
When ❸ is pressed, the sewing machine re-
trieves the origin and lifts the needle bar to its
upper position.
* In the case "U090 Initial operation upper po-
sition stop function" is set to "1", the screen
shown on the left is not displayed, but the
needle bar automatically goes up to its upper
position.
When ❹ is pressed, the stitch baseline, limit
values of normal / reverse feed stitching and limit
value of zigzag width are displayed.
❺
1) Press
The "mode screen" is displayed.
2) Select the "8. Clock setting".
The "clock setting screen" is displayed.
3) Enter year/month/day/hour/minute/second
with
The time entered is displayed in 24-hour no-
tation.
4) Press
Then, the current screen returns to the previ-
ous screen.
– 16 –
❺ .
❻ .
❼ to confirm the clock setting.