Reverse Feed Stitching (At Start) Pattern - JUKI LZ-2290CS Instruction Manual

5-2-3. Reverse feed stitching (at start) pattern

The sewing-start reverse feed stitching pattern is set as described below.
(1) Enabling the reverse feed stitching (at start) pattern
(2) Changing the number of stitches and stitch length of reverse feed stitching (at start) pattern
◆ In the case of operator mode
① Displaying the edit screen for reverse feed stitching (at start)
❶
② Setting the number of stitches and the number of repetitions of reverse feed stitching at the be-
ginning of sewing
❷
<Edit screen for reverse feed stitching
(start) (operator mode)>
❷ ❸
– 41 –
The sewing-start reverse feed stitching pattern
can be operated when the sewing-start reverse
feed stitching function is placed in the ON state
( mark is not displayed).
If this function is placed in the OFF state, press
the sewing start reverse feed stitch button to
switch off mark display to enable the sew-
ing-start reverse feed stitching function.
❶ held pressed for one second. The
reverse feed stitching (at start) edit screen is
displayed.
Change the number of reverse feed stitches with
❷ .
The value you have entered is confirmed by
❸ Then, the sewing screen is
pressing
displayed.