Connecting The Power Source Cord - JUKI DDL-9000C-S Instruction Manual

2-8-2. Connecting the power source cord

Voltage specifications at the time of delivery from the factory are indicated on the voltage indication seal.
Connect the cord in accordance with the specifications.
Power indication tag
(For example : In the case of 200V)
• Connecting single phase 220 to 240V
Table
Control box
Green/Yellow
Light blue
• Connecting 3-phase 200 to 240V
White
Table
Control box
Green/Yellow
Black
Red
• Connecting single phase 100 to 120V
Table
Control box
Green/Yellow
Light blue
Never use under the wrong voltage and phase.
Rating plate
Brown Brown
Green/Yellow
Power switch
Light blue
White
Green/Yellow
Black
Red
Power switch
Brown Brown
Green/Yellow
Power switch
Light blue
Light blue
Brown
Green/Yellow — GND
White
Black
Red
Green/Yellow — GND
– 7 –
AC220 to 240V
AC200 to 240V