JUKI LZ-2290CS Instruction Manual page 82

<Sewing screen>
❹
<Sewing data edit screen>
❺
<Sewing starting position selection screen>
❼
<Sewing data edit screen>
❸
❻
– 77 –
3) Setting of the position of sewing start.
・ Press
❸ on the sewing screen.
The "Sewing data edit screen" is displayed.
* Refer to "5-3-1. 4) Setting the zigzag width,
stitch baseline and stitch length." p. 67
for the zigzag width, stitch baseline position
and stitch length.
・ When
❹ is pressed, the "Sewing start-
ing position selection screen" is displayed.
・ Select the sewing starting position ❺
: Sewing starting position, left
: Sewing starting position, right 1
: Sewing starting position, right 2
: Sewing starting position, optional
・ When
❻ is pressed, the entered value
is confirmed and the screen is returned to the
"Sewing data edit screen".
4) Setting the sewing end position.
・ Press
❼ on the sewing data edit
screen "Sewing end position selection
screen" is displayed.