One-Touch Utility Changeover Function - JUKI LZ-2290CS Instruction Manual

5-2-8. One-touch utility changeover function

In the case the one-touch changeover function is assigned to the custom switch, the stitch length, sewing
speed, etc. can be changed over by pressing the custom switch.
* The one-touch function has been factory-allocated to the machine head switch 1 at the time of shipment.
Data that is changed over with the one-touch changeover function
・ Sewing speed
・ Stitch length
・ The number of stitches to be sewn before turning OFF the changeover function
"4-8. Custom switch" p.
Refer to
During one-touch type changeover
28.
❶
While the one-touch type changeover is being
carried out, the object data display is changed,
and the one-touch type changeover icon is dis-
played on ❶ .
– 62 –