JUKI LZ-2290CS Instruction Manual page 150

② Selecting the new condensation custom creating function
❷
<Condensation custom pattern list screen>
③ Inputting the condensation custom number
❸
<New condensation custom pattern creation pattern
number input screen>
④ Creating a condensation custom
<Condensation custom edit screen>
❹ ❺
Registered condensation custom patterns are
displayed on the screen.
❷ .
Press
The "new condensation custom pattern creation
pattern number input screen" is displayed.
1) Enter the pattern number with numeric key-
pad ❸ .
An unassigned registration number that is
closest to the entered value in the plus/minus
direction is displayed by pressing
❹ .
2) Press
The "condensation custom edit screen" is dis-
played.
In the case the entered number has already
been registered, the prompt message for
overwrite confirmation is displayed.
The method to create a condensation custom
pattern is same as in the case of a custom
pattern. Refer to
pattern" p. 140.
– 145 –
❺ .
"8-5-2. ④ Creating a custom