Copying A Pattern - JUKI LZ-2290CS Instruction Manual

8-1-2. Copying a pattern

The selected pattern (sewing pattern and cycle pattern) can be copied to any other pattern of the specified
number.
* This operation is to be carried out under the maintenance personnel mode.
Explanation is given below using copying of a sewing pattern as an example.
① Selecting the sewing pattern copy function
❶
<Sewing screen (Maintenance personnel mode)>
❷ ❸
<Sewing pattern number list screen>
② Select the copy destination pattern number
❹
<Sewing pattern number copy screen>
❺
❻
1) Press
the maintenance personnel mode.
The "sewing pattern number list screen" is
displayed.
2) Select the copy source pattern number from
list ❷ .
3) Press
The "sewing pattern number copy screen" is
displayed.
1) Enter the sewing pattern number to be regis-
tered using numeric keypad ❹ .
An unassigned registration number that is
closest to the entered value in the plus/minus
direction is displayed by pressing
❺ .
2) The created pattern is registered by pressing
❻ . Then, the current screen returns
to the "sewing pattern number list screen".
In the case the entered number has already
been registered, the prompt message for
overwrite confirmation is displayed.
– 118 –
❶ on the sewing screen under
❸ .