Pattern 1 - JUKI LZ-2290CS Instruction Manual

5-3-7. Pattern 1

❶
<Sewing shape selection screen>
<Sewing screen>
❹
<Sewing data edit screen>
❺
<Sewing starting position selection screen>
❷
❸
❻
– 79 –
1) Select pattern 1 stitch ❶ on the sewing shape
selection screen.
❷ is pressed, the entered value
2) When
is confirmed and the screen is returned to the
"Sewing screen".
3) Setting of the position of sewing start.
・ Press
❸ on the sewing screen.
The "Sewing data edit screen" is displayed.
"5-3-1. 4) Setting the zigzag width,
* Refer to
stitch baseline and stitch length." p. 67
for the zigzag width, stitch baseline position
and stitch length.
・ When
❹ is pressed, the "Sewing start-
ing position selection screen" is displayed.
・ Select the sewing starting position ❺ .
: Sewing starting position, Center 1
: Sewing starting position, Center 2
: Sewing starting position, left
: Sewing starting position, Center 3
: Sewing starting position, right
: Sewing starting position, optional
In the case of "Sewing starting posi-
tion, optional", the sewing machine
starts sewing from the next needle
entry after the completion of thread
trimming.
・ When
❻ is pressed, the entered value
is confirmed and the screen is returned to the
"Sewing data edit screen".