JUKI LZ-2290CS Instruction Manual page 49

③ Editing the data on reverse feed stitching at the beginning of sewing

A B
<Sewing-start reverse feed stitching data edit screen>
・ Inputting the stitch length (normal feed) (A)
<Stitch length (normal feed) input screen>
・ Inputting the stitch length (reverse feed) (B)
<Stitch length (reverse feed) input screen>
C D

 
 
1) When
ing-start reverse feed stitching screen, the
"sewing-start reverse feed stitching data edit
screen" is displayed.
1) When
(normal feed) input screen" is displayed.
2) When
length (normal feed) is enabled.
3) Enter the stitch length (normal feed) with nu-
meric keypad  . (-2.5 to 2.5)
In the case  is selected, the stitch length
*
will be the one employed for normal feed
stitching section.
4) When
have input is confirmed and the screen re-
turns to the "sewing-start reverse feed stitch-
ing data edit screen".
1) When
(reverse feed) input screen" is displayed.
2) Enter the stitch length (reverse feed) with
numeric keypad  . (-2.5 to 2.5)
3) When
have input is confirmed and the screen re-
turns to the "sewing-start reverse feed stitch-
ing data edit screen".
– 44 –
 is pressed on the sew-
A is pressed, the "Stitch length
 is pressed, input of the stitch
 is pressed, the value you
B is pressed, the "Stitch length
 is pressed, the value you