JUKI LZ-2290CS Instruction Manual page 36

<Mode screen>
<Memory switch type selection screen>
❸
❶
1) When
2) Select the "1. Memory switch".
3) Select the "1. Display all".
❷
4) Select "K204 Setting of mirror function" by
5) Select "1: Pattern mode" or "2: Continuous
* The initial value has been set to "2: Continu-
3) Press
❹
– 31 –
❶ is held pressed for three
seconds on the sewing screen, the "Mode
screen" is displayed.
The "memory switch type selection screen" is
displayed.
The "memory switch edit screen" is displayed.
❷ .
pressing
mode" by pressing numeric key ❸ .
ous mode".
❹ to confirm the setting.
The "memory switch edit screen" is displayed.