JUKI LZ-2290CS Instruction Manual page 164

<Warning counter type selection screen>
❼
<Warning counter set value input screen>
<Warning counter clearing setting screen>
5) Select the setting condition of the warning
❻
6) When
7) When ❸ on the "warning counter setting
8) Input the warning counter set value with nu-
9) When
❽
10) When ❹ on the "warning counter setting
11) Select enable/disable of the warning counter
❾
12) When
– 159 –
counter.
: Number of stitches (Unit: 1000 stitches)
: Operating time (Unit: Hours)
: Energizing time (Unit: Hours)
: Number of times of thread trimming
(Unit: Number of times)
❻ is pressed, the operation is
confirmed. Then, the screen returns to the
"warning counter setting screen".
screen" is pressed, the "warning counter set
value input screen" is displayed.
meric keypad ❼ .
❽ is pressed, the operation is
confirmed. Then, the screen returns to the
"warning counter setting screen".
screen" is pressed, the "warning counter
clearing setting screen" is displayed.
clearing displayed on the warning screen.
: Disable (Current-value clear key is
not displayed on the warning screen)
: Enable (Current-value clear key is
displayed on the warning screen)
❾ is pressed, the operation is
confirmed. Then, the screen returns to the
"warning counter setting screen".