JUKI LZ-2290CS Instruction Manual page 63

(2) Setting items for the polygonal-shape stitching steps
Data No. Item name
Step 01
S201 Step changeover
S204 Number of stitches
(seam length in mm)
S205 Stitch length
(the number of stitches per inch,
the number of stitches per 3 cm)
S206 Reverse feed stitch length
S211 Needle bar stop position at the
time of pause
S212 Needle entry alignment position of
the needle bar
S213 Presser foot lifting during
intermediate stop:
S214 Needle bar stop position at the
time of stop
S215 Stop and presser foot lifting
S216 Lifting height of presser foot when
the sewing machine stops
S217 One shot
S219 Sewing speed
Step 02
Unit of
change
―
1 stitch
0.1 mm
0.1 mm
―
：Stop with the needle up
：Stop with the needle down
―
：OFF
0.1 mm
―
：Stop with the needle up
：Stop with the needle down
：Thread trimming
：Continuity
：OFF
0.1 mm
：OFF
10 sti/min
・
・
– 58 –
Input range
: Number of stitches
: One-touch switch
1 to 10000
-5.0 to 5.0
-5.0 to 5.0
：ON
0.0 to 20.0
：ON
0.0 to 20.0
：ON
150 to U096