JUKI LZ-2290CS Instruction Manual page 73

❼
<Zigzag width input screen>
❾
<Stitch baseline input screen>

<Stitch length input screen>

<Sewing screen>
・ Enter the zigzag width with numeric keypad
・ When
❽
[Setting of the position of stitch base line]
・ Press
・ Enter the stitch baseline position with numeric
・ When

[Setting the stitch length]
・ Press
・ Enter the stitch length with numeric keypad
・ When

5) Setting of the position of sewing start.
・ Press
– 68 –
❼ . (0.0 to 10.0)
❽ is pressed, the entered value
is confirmed and the screen is returned to the
"Sewing screen".
❺ on the sewing screen.
The "Stitch baseline input screen" is dis-
played.
keypad ❾ . (-5.0 to 5.0)
 is pressed, the entered value
is confirmed and the screen is returned to the
"Sewing screen".
❻ on the sewing screen.
The "Stitch length input screen" is displayed.
 . (-2.5 to 2.5)
 is pressed, the entered value
is confirmed and the screen is returned to the
"Sewing screen".
 on the sewing screen.
The "Sewing data edit screen" is displayed.