Table of Contents
Advertisement
❽
<Sewing end position selection screen>
The feed amount cannot be set to 0 and the T stitch
pattern may be deformed due to materials, height of
fed dog or gauges. (2nd stitch does not correspond
with 4th stitch.)
In this case, carry out correction following the steps
of procedure described below so as to align the
needle entry positions of the second and fourth
stitches in the case the feed amount is 0 (zero).
<Sewing screen>
<Second sewing screen>
❾
– 78 –
・ Select the sewing end position ❽ .
: Sewing end position, left
: Sewing end position, right 1
: Sewing end position, right 2
: Sewing end position, optional
・ When
❾ is pressed, the entered value
is confirmed and the screen is returned to the
"Sewing data edit screen".
1
2
4
on the sewing screen.
5) Press
The "Second sewing screen" is displayed.
is pressed,
6) When
played. Now, enter a correction value.
is pressed, the entered value
7) When
is confirmed and the screen is returned to the
"Sewing screen".
1
–
3
3
2
4
+
Correspon-
dence
is dis-
Hide quick links:
Advertisement
Table of Contents
