JUKI LZ-2290CS Instruction Manual page 42

Switch/display
 *
Sewing shape button
 *
Sewing pattern button

Customization button

Customization button

Customization button

Customization button

Customization button
 *
Customization button
 *
Customization button

Customization button

Multi-layer stitching button

Number of stitches

Display of the number of
pattern steps
* Only in the case the maintenance personnel mode is selected.
The selected sewing shape is displayed on the operation panel.
Refer to "5-3. Setting of the sewing shape" p.
The shape selection screen is displayed by pressing this button.
Selected sewing pattern is displayed on this screen.
Five different sewing patterns such as free sewing patterns, constant-dimension sewing
patterns, overlapped stitching pattern, polygonal-shape stitching patterns and continu-
ous sewing patterns are available.
The sewing pattern selection screen is displayed by pressing the sewing pattern button.
A selected function can be allocated to and registered with this button.
This button has been initially set to the "Bobbin thread / sewing counter".
Refer to "5-2-6. List of pattern functions" p.
A selected function can be allocated to and registered with this button.
This button has been initially set to the "Sewing speed".
Refer to "5-2-6. List of pattern functions" p.
A selected function can be allocated to and registered with this button.
This button has been initially set to the "Stitch length".
Refer to "5-2-6. List of pattern functions" p.
A selected function can be allocated to and registered with this button.
This button has been initially set to the "Zigzag width".
"5-2-6. List of pattern functions" p.
Refer to
A selected function can be allocated to and registered with this button.
This button has been initially set to the "Stitch baseline".
"5-2-6. List of pattern functions" p.
Refer to
A selected function can be allocated to and registered with this button.
This button has been initially set to the "Thread trimming".
Refer to "5-2-6. List of pattern functions" p.
A selected function can be allocated to and registered with this button.
This button has been initially set to the "Sewing data list".
Refer to "5-2-6. List of pattern functions" p.
A selected function can be allocated to and registered with this button.
This button has been initially set to the "Second sewing screen".
Refer to "5-2-6. List of pattern functions" p.
The multi-layer stitching setting screen is displayed by keeping this button held pressed
for one second.
Refer to "5-2-5. Editing the sewing patterns" p.
→ This button is displayed when multi-layer stitching is selected.
The number of stitches for the constant-dimension sewing, and the number of stitches
registered for each step of polygonal-shape stitching and continuous sewing are dis-
played.
→ The number of stitches is displayed in the case the constant-dimension sewing, po-
lygonal-shape stitching or continuous sewing is selected.
The current step is displayed on the left portion and the total number of steps is dis-
played on the right portion of the operation panel.
"1 - 30" is displayed as the number of pattern steps in the case of the polygonal-shape
stitching, or "1 - 20" is displayed in the case of the continuous sewing.
→ "Display of the number of pattern steps" is displayed in the case the polygonal-shape
stitching or continuous sewing is selected.
– 37 –
Description
67.
50.
50.
50.
50.
50.
50.
50.
50.
47.